Heat Pump, Nominal Capacity 5.0 Tons, SEER 9.5, Nominal Heating HSPF 7.7, Nominal Heating MBH 61.0, Minimum Circuit Current 24.5 Amps, Liquid Line OD 3/8 Inch, Suction Line OD 7/8 Inch, Maximum Fuse Size 40, Height 26 Inches, Depth 32 Inches, Width 43 Inches, 3 Phase. High capacity heat pumps feature the Carrier exclusive "slinger" wheel which recycles condensate water onto the condenser coil, minimizing water runoff onto your RV, Available in ducted and non-ducted configurations. The aerodynamic rooftop and Slim-Line ceiling units are available in white or ivory. This access for cleaning the outdoor coil enables easy removal of dirt and debris to dramatically lengthen the life of the compressor and other sealed system components. Six easy access screws and let the cleaning begin! Not available on competitor models.

You can add sound, lights, water features, and accent pieces to your railroad with Bachmann's extensive selection of operating accessories. When starting an automatic demand pump with a dry system, allow time for the demand pump to fill the system. Open faucet, allow air to vent and close faucet when water flow is steady.MOTOR: Permanent magnet, thermal protection. Intermittent duty.PUMP: Two-chamber opposed double diaphragm design self priming up to 4' suction lift. Can dry run .PORT: Pump without damage. housing inlet and outlet are 3/8" hose barb. The pump consists of a power unit encased in water-proof epoxy which creates a magnetic field. This drives a powerful ceramic magnetic impeller, the only moving part. It does not contain seals or contaminating oils therefore, it is virtually maintenance free.